SAE J1401 DOT Hydraulic Brake Hose Assembly with competitive prices Brake hose assembly is the very important part of vehicles brake system. There are advanced production equipment and testing equipment in our company to ensure the quality of the products. The brake hoses manufactured by us has the features of bursting strength, low volumetric expansion, excellent weather resistance and so on. The products are strictly in compliance with GB16897-2010, SAE J1401. Material: EPDM, polyester thread Feature: Low moisture permeation, extended service life, minimal volume expansion, excellent heat and ozone resistance. Hydraulic brake hose: Cars, motorcycles, light trucks and other vehicles for hydraulic brake system. The tests applied to our brake hose assemblies are: 100% PRESSURE PROOF TEST ID CONSTRICTION TEST WITH BENT THE FITTING EXPANSION TEST BURST TEST WHIP TEST TENSILE TEST WATER ABSORPTION TEST LOW TEMPERATURE TEST BRAKE FLUID COMPATIBILITY TEST OZONE TEST IMPULSE TEST DYNAMIC OZONE TESTS

No.	Test Items		Standard Specification	Test Result
1	100%Pressure Test		28MPa, Hold 120 Sec.	OK
2	Internal Channel Fluent Volume		≥ Ф2.03mm	OK
3	VolumetricExpansion	6.9 MPa	≤1.08 mL/m	0.45	OK
				0.43
				0.44
				0.43
		10.3 MPa	≤1.38 mL/m	0.61	OK
				0.58
				0.59
				0.57
	Burst Test	28MPa, Hold 120 Sec.	No Break	No Break	OK
4
		Minimum Burst Pressure	≥49.0 MPa,No Burst	60MPa,No Burst	OK
5	Whip Test		≥35H ,No Break	No Break	OK
6	Tensile Test		≥1446N,Hose No Break, Joint No Pull-out	1600N,No Break No Pull-out	OK
7	Low Temperature Resistance		-40+1℃, 72hrs,No breakage, No cracks	No Cracks	OK
8	Ozone Test		50+5ppm , 40℃+2℃, 72hrs,No breakage, No cracks	No Cracks	OK
9	Salt Spray Test		24H,No Base Metal Corrosion	No Base Metal Corrosion	OK